| | Seal Profile Selector | Find the cross section that matches the seal you wish to use.
| | download time with 28.8 modem: 2.9 seconds | size: 79.0 KB |
|
| |
| | PSP Seal, Bi-Directional Piston Seal | This unique geometry of the PSP seal design creates a fluid reservoir between the two bevel bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and running friction.
| | download time with 28.8 modem: 2.9 seconds | size: 79.6 KB |
|
| | PolyPak, Loaded U-Cup Rod | Rod & Piston seal positive, leak free seal from hard vacuum to over 60,000 psi with proper design and auxillary devices.
| | download time with 28.8 modem: 26.1 seconds | size: 714.7 KB |
|
| | LC Profile, One-Piece Loaded U-Cup | Eliminates the possibilities of the expander ring becoming partially dislodged during rapid preasure fluctuations - resulting in leakage with two piece seals.
| | download time with 28.8 modem: 6.0 seconds | size: 164.7 KB |
|
| | Poly BiPak, Bi-Directional Piston Seal | Multi-purpose multi-material. The seal is unique in that it consists of one soft and resilient seal sandwiched between two high-modulus shells.
| | download time with 28.8 modem: 5.4 seconds | size: 147.8 KB |
|
| |
| |
| |
| |
| | U-Cups, Rod & Piston | Low friction, small cross-sections facilitate product design. Built-in flexibility permits snap in assembly.
| | download time with 28.8 modem: 5.2 seconds | size: 142.1 KB |
|
| | SCL Seal, Special Cut Lip | Designed to give safe margins over the contemporary hydraulic system pressures, preventing extrusion when shock loads momentarily exceed normal system pressures.
| | download time with 28.8 modem: 3.4 seconds | size: 93.2 KB |
|
| | U-Cup Backing Rings | Dynamic extrusion resistance up to 7000 psi.
| | download time with 28.8 modem: 2.3 seconds | size: 62.2 KB |
|
| | WV Packing, Multiple Lip Rod Seals | Provides sealing properties that are largely independent of stacking pressure. No gland adjustment is required during the seal life.
| | download time with 28.8 modem: 2.9 seconds | size: 80.0 KB |
|
| | T-Seals, Piston | Uses standard O-ring glands, eliminates O-ring spiral failure and prevents extrusion.
| | download time with 28.8 modem: 2.2 seconds | size: 59.3 KB |
|
| | T-Seals Rod | Uses standard O-ring glands, eliminates O-ring spiral failure and prevents extrusion.
| | download time with 28.8 modem: 2.2 seconds | size: 59.7 KB |
|
| | Piston Cups | Specifically for pistons in reciprocating pumps and pneumatic and hydraulic cylinders. They offer long service life, require a minimun recess space, minmun machining and are simply and quickly installed.
| | download time with 28.8 modem: 6.7 seconds | size: 181.9 KB |
|
| | V-Packings | For rods and pistons. Multiple lip (chevron) packing sets designed to seal reciprocating rods & pistons.
| | download time with 28.8 modem: 5.1 seconds | size: 138.9 KB |
|
| | Leather Packings | Piston cups, flange packing, u-packing, v-packing, washers, can be impregmated with different materials to make them adaptable to a wide range of operating conditions.
| | download time with 28.8 modem: 2.6 seconds | size: 71.8 KB |
|
| | Cushion Seals | Used to damper pistons in pneumatic cylinders.
| | download time with 28.8 modem: 9.5 seconds | size: 260.1 KB |
|
| | Bumper Seals, Piston | Low friction pneumatic seal that provides quiet decelation and reduced end sroke noise.
| | download time with 28.8 modem: 3.0 seconds | size: 82.6 KB |
|
| |
| | BP Profile Piston Seal | Low break-away and running friction. Easy snap in installation.
| | download time with 28.8 modem: 5.8 seconds | size: 157.7 KB |
|
| | Integrated Piston | Is a self-contained completely integrated piston, bearing and seal, all in one assembly.
| | download time with 28.8 modem: 6.3 seconds | size: 171.9 KB |
|
| | Metric Seal Profile Selector | Find the cross-section and profile refernce that matches the metric seal you wish to replace.
| | download time with 28.8 modem: 3.1 seconds | size: 85.6 KB |
|
| |
